Photovoltaic solar panels selected by heliosolaire

Solar equipment suppliers have been carefully selected on criteria of high quality and efficient.

The fabiquants of photovoltaic solar panels that we offer are members of the European Association PV CYCLE is in charge of organizing the recycling of solar panels at the end of life.

Sillia solar panels

SILLIA is a 100% French company that designs and produces all of its panels in Lannion.
The module was designed to integrate new generation of cells 2010.
This allows him to benefit in 2009 from 5 diodes "bypass", protecting and increasing significantly the performance of panels under actual conditions of partial shade (clouds, trees, buildings, snow ...) well beyond the notion that peak power does not take into account these parameters.

The peak power is itself very good with an average yield of 135 Wp / m², despite the space needed for the implementation of the 5 diodes "bypass".

Other specifics of the module SILLIA:
-3 Bus-bars (inter-cell connections) to increase the performance of the panel
-Glass 4 mm thick, allowing the module to pass the certification products normally destined for export to cyclone zone. The module is indeed subjected to a pressure of 5400 Pa instead of 2400 Pa. This resistance is strongly recommended in case of heavy snowfall.
-The location of the 5 diodes (one every twelve cells) allows each diode to protect 2 lines (panel position "portrait"). In case of snow, when the two upper lines of the module are found, the panel can start generating electricity.

The heat generated then accelerates the melting of snow, releasing additional cells until the panel is fully operational.
Photovoltaic panels have proposed SILLIA energy and unique architecture in the market to ensure optimum production.

Kyocera solar panels

Kyocera Fineceramics GmbH, based in Germany, is a 100% subsidiary of KYOCERA CORPORATION JAPAN. It is well established on the market for solar electric (photovoltaic) growing rapidly in Europe, Africa and the Middle East.

Kyocera is among the world leaders in cell and polycrystalline solar modules.

Kyocera is one of few companies on the market that takes care of itself all stages of production, without additional purchases of intermediate products. Absolute control of all phases of production and the production process fully automatic guarantee consistent quality and far superior to our products.

Schott solar panels

SCHOTT Solar cells are manufactured at its modern plant in Alzenau, Germany.

The Schott Solar photovoltaic panels are manufactured to strict quality guidelines ensuring high-quality panels and safety.

The design of the modules is made from bread to silicon framework in Germany and each panel is individually measured and controlled.The solar components InDaX ® 4th generation advantageously replace conventional roofing materials and are of a dual function: ecological production of solar electricity and the water tightness of overlying structures.

The SCHOTT InDax meets the requirements of IEC 61215 and IEC 61730, Electrical Protection Class II and the guidelines CE.

Schott is certified ISO 2000. This international standard ISO 9001 establishes the principles of organization that a company implements an ongoing basis to ensure its customers with its perfect mastery of the phases of design, manufacture, marketing and aftermarket products and services.